Absorbs, not just covers
A high-density recycled fibre core behind real veneer — tested absorption, not a decorative board.
Save 36%Acoustic Wood Wall System
Paneles acústicos de pared de listones de roble negro de primera calidad de Unisoar
Real wood veneer over an acoustic core — engineered so a room can go quiet without going cold.
$139.99$219.99
Save 36%
Request a quote
Free US shipping · 30-day returns · Ships in 2–3 business days
Measured, not claimed
What the eye misses,
What the eye misses,
the ear notices.
Why this panel
Built for rooms
Built for rooms
that get used.
Three things every acoustic panel should get right — and how we test them.
Matched across runs
Batch-matched by mill lot, so a wall ordered in March meets a wall ordered in November.
Cuts like timber
A fine-tooth blade or multi-tool is all you need. No specialist trade, no furring strips.
The full sheet
Read the spec sheet
Read the spec sheet
before you buy.
Everything below is pulled straight from this product's own data — no marketing rounding.
| Especificación | Detalles |
|---|---|
| Paneles por caja | 2 |
| Cobertura por caja | 16,5 pies cuadrados (1,53 m²) |
| Tamaño del panel | 94,5" de alto × 12,6" de ancho |
| Espesor | 0,67" (17 mm) |
| Capa superficial | Chapa de roble de ingeniería |
| Centro | MDF ecológico + fibra de poliéster de alta densidad |
| Envoltura de chapa | envoltura de un lado |
| Peso | 9,5 kilos |
| Diseño y estilo | Listón en relieve 3D, veta de madera natural |
| Instalación | Clavo/Adhesivo (Apto para bricolaje) |
| Superficies compatibles | Paneles de yeso, hormigón, ladrillo, estuco, yeso pintado |
| Ubicación | Paredes y techos |
| Rendimiento acústico | NRC 0.8 (probado) |
| Sin formaldehído | ✅ |
| Resistencia a la humedad | No apto para zonas con mucha humedad. |
| Mantenimiento | Fácil de limpiar, sin limpiadores abrasivos. |
Installation
Four steps.
Four steps.
One afternoon.
No specialist trade required. A single accent wall is a two-to-three hour job.
01
Plan & measure
Measure the wall, divide the square footage by the coverage per carton, then add 10% for cuts and off-falls.
02
Cut to fit
Cut through the felt core with a fine-tooth blade. Score the veneer face first so it does not tear.
03
Mount
Apply construction adhesive to a clean flat surface, or screw through the felt core into studs.
04
Butt & continue
Panels butt cleanly at the edges. Work left to right and check level every third panel.
Before you order
Questions we get
Questions we get
every week.
How many cartons do I need?
Measure the wall, divide the square footage by the coverage per carton shown in the spec sheet above, then add 10% for cuts and off-falls.
Can I install these myself?
Yes. No specialist trade is required. Cut with a fine-tooth blade or multi-tool, then apply construction adhesive to a clean flat surface, or screw through the felt core into studs. A single accent wall is a two-to-three hour job.
Will the colour match my last order?
Wood is a natural material, so slight variation between runs is normal. We batch-match by mill lot and confirm your lot number before dispatch.
Do they work on ceilings?
Yes. Screw directly into joists, or use adhesive plus mechanical fixings for anything overhead. The flexible range follows a radius down to roughly 30 cm.
What is the return policy?
Unopened cartons may be returned within 30 days. Order a swatch kit first — the cost is credited back against your first panel order.
Start with the materialHold the wood
Order Free Swatch KitHold the wood
in your hand.
Order a swatch kit and decide with the finish against your own light — not with a photograph on a screen.
Paneles acústicos de pared ...
$139.99