Acoustic Slat Wood Wall Panels | Premium Soundproof Panels by Unisoar

Each box contains two panels measuring 94.49" x 12.60". These panels will join next to each seamlessly with no join line showing.

We have designed the panels to join both width-ways and long ways seamlessly so any length or width can easily be achieved.

There are 3 different options for installing our panels.

1. Gluing straight onto the wall.
   
   A construction glue or grab adhesive is recommended for this.
   
   
   
2. Screwing directly into the wall.
   
   By using black screws for the black backing option or silver or grey screws for the grey-backed option the panels can be screwed directly into the wall through the acoustic felt.
   
   We recommend a minimum of 9 screws per panel at regular intervals across the width and 800mm down the length of the panel.
   
   If installing into ceilings then make sure they are screwed into ceiling joists.
   
   Please make sure the correct fixings are used if going into plasterboard for example.
   
   
   
3. Screwing the panels into 45mm timber batons.
   
   To achieve optimum sound absorption we recommend screwing 45mm timber batons to the wall and then screwing the panels directly into the batons through the acoustic felt.
   
   If something like Rockwool is applied behind the panels and in between the batons, this will achieve Class A sound absorption.

The panels are all in stock, so delivery takes 5-10 days. If we do have to wait for a new production run then it can be 2-3 weeks but please get in contact at the point of order, and we can confirm this right away.

We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller. They also join together seamlessly if you need bigger.

Panels can be used in kitchens and bathrooms if not in direct contact with water. Always ensure good ventilation and avoid constant high humidity for best performance.

Our wood veneer acoustic panels are designed for indoor use. For outdoor spaces, prolonged exposure to rain and sun is not recommended.

Yes. Panels come pre-finished in natural wood veneer. You may apply oils, waxes, or lacquers if you prefer a different look or additional protection.

Simply cut the panels to size with standard woodworking tools. They can be trimmed neatly around plug sockets, windows, and doors.

Our acoustic wall panels can be installed on drywall, brick, concrete, or wood. Ensure the surface is dry, stable, and clean before mounting.

Yes. The photos represent the true veneer tones, though natural wood grain and screen settings may cause slight variation.

Edges can be finished with matching trim or corner strips for a seamless appearance.

Yes. The felt backing allows you to discreetly run cables and wires, ideal for TVs, sound systems, or lighting setups.

The panels are available with a fire-rated felt backing on request. However, the face materials are not. Please get in touch with us for more information.

Yes. Adding mineral wool or acoustic insulation batts behind the panels significantly increases overall sound absorption.

Unisoar offers a customer-friendly return policy. If panels are unused and in original packaging, you can return them within 30 days.

Yes. You can order wood slat wall panel samples before purchase to see the veneer finish and test the acoustic performance.